新增工艺流程参数与补偿配置

docs/功能测试流程-工艺流程.md

@@ -0,0 +1,140 @@
+# 功能测试流程文档 ——【工艺流程】
+
+> 本文档为【工艺流程】功能补齐后的独立测试文档。测试人员请按以下流程逐步执行，对通过的用例在“通过”列打勾（`[x]`），未通过的用例在“问题记录”列描述具体现象。
+
+| 项目名称 | MES-UI（生产主数据 → 工艺模型 → 工艺流程） |
+| --- | --- |
+| 文档版本 | v1.0 |
+| 适用版本 | mes-ui 本次迁移版本 |
+| 编写日期 | 2026-06-22 |
+| 测试入口 | 菜单：生产主数据 → 工艺模型 → 工艺流程 |
+| 关联文件 | `src/views/production-master-data/process-model/process-routing/index.vue`、`src/views/production-master-data/process-model/process-routing-card/index.vue`、`src/api/production-master-data/process-routing-card.js`、`src/api/production-master-data/calculation-script.js` |
+
+---
+
+## 一、测试环境配置要求
+
+| 项 | 要求 |
+| --- | --- |
+| 后台环境 | Webman 已部署 `production_configuration/technology_model/technology_flow`、`technology_flow_process`、`calculation_script` 相关接口 |
+| 前端环境 | 使用 Node 18.16.0，执行 `pnpm run serve` 启动 V2 项目 |
+| 登录账号 | 拥有工艺流程、流程卡、设定值、结果参数、温度补偿、计算脚本相关权限点 |
+| 数据准备 | 至少 1 个流程类别、1 个产品型号、多个工序单元；至少 1 个未绑定批次的工艺流程 |
+| 浏览器工具 | 打开 DevTools → Network 与 Console，便于核对接口参数和异常 |
+
+---
+
+## 二、测试前置条件
+
+1. 已成功登录系统，侧边栏可进入 **生产主数据 → 工艺模型 → 工艺流程**。
+2. 工艺流程列表能正常加载，且存在可进入“设置工序”的流程。
+3. 测试账号拥有以下权限点：新增、编辑、删除、复制、设置工序、排序、设定值、结果参数、温度补偿、计算脚本、查看日志。
+4. 浏览器语言分别切换为简体中文 / English 时页面无 i18n key 缺失。
+
+---
+
+## 三、测试用例
+
+### 3.1 工艺流程主列表
+
+| 用例编号 | 操作步骤 | 预期结果 | 实际结果 | 通过 | 问题记录 |
+| --- | --- | --- | --- | --- | --- |
+| 3.1.1 | 进入“工艺流程”菜单 | 列表加载成功，展示编码、名称、流程类别、产品、备注、创建人、创建时间、操作 |  | [ ] |  |
+| 3.1.2 | 按编码、名称、流程类别、产品分别查询 | 请求参数正确，列表按条件刷新 |  | [ ] |  |
+| 3.1.3 | 点击重置 | 查询条件清空，列表恢复第一页 |  | [ ] |  |
+| 3.1.4 | 新增工艺流程并保存 | 调用 `technology_flow/create`，保存成功后列表刷新 |  | [ ] |  |
+| 3.1.5 | 编辑工艺流程 | 表单回显正确，编码禁用，保存后列表更新 |  | [ ] |  |
+| 3.1.6 | 复制工艺流程 | 弹出确认框；确认后调用 `technology_flow/copy` 并刷新列表 |  | [ ] |  |
+| 3.1.7 | 删除未绑定批次流程 | 弹出确认框；确认后调用删除接口并刷新 |  | [ ] |  |
+| 3.1.8 | 删除已绑定批次流程 | 页面提示已绑定批次不可删除，不发删除请求 |  | [ ] |  |
+
+### 3.2 流程卡工序维护
+
+| 用例编号 | 操作步骤 | 预期结果 | 实际结果 | 通过 | 问题记录 |
+| --- | --- | --- | --- | --- | --- |
+| 3.2.1 | 点击列表行“设置工序” | 进入流程卡页面，展示工艺信息和工序明细 |  | [ ] |  |
+| 3.2.2 | 点击“新增”选择工序单元 | 自动生成工序编码/名称，并按工序单元编码自动设置通道检测 |  | [ ] |  |
+| 3.2.3 | 新增工序保存 | 调用 `technology_flow_process/create`，参数包含 `flow_id`、`workingsubclass_id`、`code`、`name`、`pin_check` |  | [ ] |  |
+| 3.2.4 | 编辑工序 | 工序单元、编码、名称禁用，通道检测可回显；保存调用 `edit` |  | [ ] |  |
+| 3.2.5 | 删除工序 | 调用 `technology_flow_process/delete`，参数包含 `id: []`、`flow_id` |  | [ ] |  |
+| 3.2.6 | 上移/下移工序 | 调用 `move_up` / `move_down`，排序刷新正确 |  | [ ] |  |
+| 3.2.7 | 已绑定批次流程 | 新增、删除、排序被限制或提示不可操作 |  | [ ] |  |
+
+### 3.3 设定值
+
+| 用例编号 | 操作步骤 | 预期结果 | 实际结果 | 通过 | 问题记录 |
+| --- | --- | --- | --- | --- | --- |
+| 3.3.1 | 点击有 `setting_plugin` 的工序“设定值” | 弹出设定值窗口，显示插件类型、工序编码和现有 JSON |  | [ ] |  |
+| 3.3.2 | 输入合法 JSON 并保存 | 调用 `technology_flow_process/set_setting`，`setting` 为 JSON 字符串 |  | [ ] |  |
+| 3.3.3 | 输入非法 JSON | 页面提示 JSON 格式不正确，不提交接口 |  | [ ] |  |
+
+### 3.4 结果参数
+
+| 用例编号 | 操作步骤 | 预期结果 | 实际结果 | 通过 | 问题记录 |
+| --- | --- | --- | --- | --- | --- |
+| 3.4.1 | 点击任一工序“结果参数” | 弹窗按当前 `flow_process_id` 调用 `get_optional_params_details` |  | [ ] |  |
+| 3.4.2 | 按名称/参数查询 | 请求包含 `process_id`、`name`、`code`，列表刷新 |  | [ ] |  |
+| 3.4.3 | 点击“添加结果参数” | 调用 `get_all_workingsubclass_params`，左侧显示全部参数，右侧显示已选参数 |  | [ ] |  |
+| 3.4.4 | 勾选参数并同步到右侧后提交 | 调用 `add_optional_params`，`optional_params` 为 JSON 字符串，列表刷新 |  | [ ] |  |
+| 3.4.5 | 未变更直接提交 | 页面提示请选择结果参数，不提交保存 |  | [ ] |  |
+
+### 3.5 温度补偿
+
+| 用例编号 | 操作步骤 | 预期结果 | 实际结果 | 通过 | 问题记录 |
+| --- | --- | --- | --- | --- | --- |
+| 3.5.1 | 对化成/分容类工序点击“温度补偿” | 打开抽屉，调用 `get_step` 和 `get_temperature_list` |  | [ ] |  |
+| 3.5.2 | 选择开始/结束工步 | 开始大于结束时出现提示 |  | [ ] |  |
+| 3.5.3 | 新增温度补偿行并保存 | 调用 `create_temperature`，包含 `process_id`、工步范围、`temp_data` |  | [ ] |  |
+| 3.5.4 | 输入非数字温度或补偿值 | 页面提示必须为数字，不提交 |  | [ ] |  |
+| 3.5.5 | 输入重复温度 | 页面提示重复温度，不提交 |  | [ ] |  |
+| 3.5.6 | 下载模板 | 调用 `get_temperature_template`，浏览器下载 xlsx 文件 |  | [ ] |  |
+| 3.5.7 | 导入含“温度 / 温度补偿值”列的 Excel | 数据追加到表格并按温度升序排列 |  | [ ] |  |
+
+### 3.6 计算脚本
+
+| 用例编号 | 操作步骤 | 预期结果 | 实际结果 | 通过 | 问题记录 |
+| --- | --- | --- | --- | --- | --- |
+| 3.6.1 | 点击工序“计算脚本” | 打开弹窗并调用 `calculation_script/all` |  | [ ] |  |
+| 3.6.2 | 新增计算脚本 | 必填编码、名称、接口、接口位置、脚本内容；保存调用 `create` |  | [ ] |  |
+| 3.6.3 | 编辑计算脚本 | 表单和脚本内容回显，保存调用 `edit` |  | [ ] |  |
+| 3.6.4 | 删除计算脚本 | 弹出确认框，确认后调用 `delete` 并刷新列表 |  | [ ] |  |
+| 3.6.5 | 脚本内容为空时保存 | 页面提示请输入脚本内容，不提交 |  | [ ] |  |
+
+### 3.7 日志、权限与异常
+
+| 用例编号 | 操作步骤 | 预期结果 | 实际结果 | 通过 | 问题记录 |
+| --- | --- | --- | --- | --- | --- |
+| 3.7.1 | 点击“查看日志” | 打开日志抽屉并展示 `technology_flow_operate_log` |  | [ ] |  |
+| 3.7.2 | 使用只读账号访问 | 新增/编辑/删除/排序/插件按钮按权限隐藏 |  | [ ] |  |
+| 3.7.3 | 切换英文 | 主列表、流程卡、结果参数、温度补偿、计算脚本文案显示英文 |  | [ ] |  |
+| 3.7.4 | 后端返回 500 或字段缺失 | 页面不白屏，Console 无未捕获异常 |  | [ ] |  |
+
+---
+
+## 四、测试结果汇总
+
+| 用例总数 | 通过 | 失败 | 阻塞 | 通过率 |
+| --- | --- | --- | --- | --- |
+|  |  |  |  |  |
+
+---
+
+## 五、问题记录区
+
+| 编号 | 用例编号 | 复现步骤 | 实际结果 | 严重程度 | 处理人 | 状态 | 备注 |
+| --- | --- | --- | --- | --- | --- | --- | --- |
+| 1 |  |  |  |  |  |  |  |
+| 2 |  |  |  |  |  |  |  |  |
+
+---
+
+## 六、测试结论
+
+| 项目 | 结论 |
+| --- | --- |
+| 功能完整性 | ☐ 满足 ☐ 部分缺失 ☐ 不满足 |
+| 权限控制 | ☐ 正确 ☐ 存在漏洞 |
+| 国际化 | ☐ 完整 ☐ 部分缺失 ☐ 缺失 |
+| 是否可发布 | ☐ 是 ☐ 否（请说明阻塞问题） |
+
+测试人员签字：__________________  日期：__________

docs/工艺流程迁移分析方案.md

@@ -0,0 +1,79 @@
+# 工艺流程（Process Routing）迁移分析方案
+
+## 一、旧代码研读范围
+
+- 旧页面：`/home/james/WEBMAN-VUE-APP-develop/webman-vue-app/src/views/production_configuration/technology_model/technology_flow/process.vue`
+- 旧 API：`src/api/production_configuration/technology_model/technology_flow.js`、`technology_flow_process.js`、`calculation_script.js`
+- 旧组件：`components/ProcessPlugin/ResultParam`、`TemperatureSupp`、`CalculationScript`、`components/technology/technology-flow-model.vue`
+- V2 页面：`src/views/production-master-data/process-model/process-routing/index.vue`、`process-routing-card/index.vue`
+
+## 二、旧模块接口清单
+
+| 接口 | 方法 | method 参数 | platform | 主要参数 | 返回数据使用 |
+| --- | --- | --- | --- | --- | --- |
+| `production_configuration/technology_model/technology_flow/list` | GET | `production_configuration_technology_model_technology_flow_list` | background | `page_no`、`page_size`、`code`、`name`、`flow_category_id`、`product_model_id` | 工艺流程主列表 |
+| `technology_flow/create` | POST | `production_configuration_technology_model_technology_flow_create` | background | `code`、`name`、`flow_category_id`、`product_model_id`、`remark` | 新增流程 |
+| `technology_flow/edit` | PUT | `production_configuration_technology_model_technology_flow_edit` | background | `id` + 表单字段 | 编辑流程 |
+| `technology_flow/delete` | DELETE | `production_configuration_technology_model_technology_flow_delete` | background | `id: []` | 删除流程 |
+| `technology_flow/copy` | POST | `production_configuration_technology_model_technology_flow_copy` | background | `id: []` | 复制流程 |
+| `technology_flow_process/all` | GET | `production_configuration_technology_model_technology_flow_process_all` | background | `flow_id` | `process`、`flow_data`、`is_binding_batch`、`technology_flow_operate_log` |
+| `technology_flow_process/create` | POST | `..._create` | background | `flow_id`、`workingsubclass_id`、`code`、`name`、`pin_check` | 新增流程工序 |
+| `technology_flow_process/edit` | PUT | `..._edit` | background | `id`、`flow_id`、表单字段 | 编辑流程工序 |
+| `technology_flow_process/delete` | DELETE | `..._delete` | background | `id: []`、`flow_id` | 删除流程工序 |
+| `technology_flow_process/move_up` | POST | `..._move_up` | background | `flow_id`、`move_id`、`quilt_move_id`、`move_sort`、`quilt_move_sort` | 上移排序 |
+| `technology_flow_process/move_down` | POST | `..._move_down` | background | 同上 | 下移排序 |
+| `technology_flow_process/set_setting` | POST | `..._set_setting` | background | `id`、`flow_id`、`setting: JSON.stringify(data)` | 保存设定值插件数据 |
+| `technology_flow_process/get_optional_params_details` | GET | `..._get_optional_params_details` | background | `process_id`、`page_no`、`page_size`、`name`、`code` | 当前流程工序已绑定结果参数 |
+| `technology_flow_process/get_all_workingsubclass_params` | GET | `..._get_all_workingsubclass_params` | background | `process_id` | 左右树：全部/已选结果参数 |
+| `technology_flow_process/add_optional_params` | POST | `..._add_optional_params` | background | `process_id`、`optional_params: JSON.stringify(list)` | 保存结果参数绑定 |
+| `technology_flow_process/get_step` | GET | `..._get_step` | background | 无 | 温度补偿工步下拉 |
+| `technology_flow_process/get_temperature_list` | GET | `..._get_temperature_list` | background | `process_id` | `data`、`start_work_step_id`、`end_work_step_id` |
+| `technology_flow_process/create_temperature` | POST | `..._create_temperature` | background | `process_id`、`start_work_step_id`、`end_work_step_id`、`temp_data` | 保存温度补偿 |
+| `technology_flow_process/get_temperature_template` | POST | `..._get_temperature_template` | background | 无 | blob 模板文件 |
+| `calculation_script/all` | GET | `production_configuration_technology_model_calculation_script_all` | background | `process_id` | 当前工序计算脚本列表 |
+| `calculation_script/create` | POST | `..._create` | background | `process_id`、`code`、`name`、`interface_code`、`interface_position`、`status`、`remark`、`calculation_script_content` | 新增脚本 |
+| `calculation_script/edit` | PUT | `..._edit` | background | `id` + 新增字段 | 编辑脚本 |
+| `calculation_script/delete` | DELETE | `..._delete` | background | `id` | 删除脚本 |
+
+## 三、旧组件清单
+
+| 组件 | 功能 | 关键属性/状态 | 使用场景 |
+| --- | --- | --- | --- |
+| `SctBaseTable` | 工序明细表格，带上移/下移/操作列插槽 | `columns`、`data`、`buttontable`、`up/down/handle` 插槽 | 流程卡工序列表 |
+| `SctBaseDialog` + `SctBaseForm` | 新增/编辑流程工序 | `workingsubclass_id`、`code`、`name`、`pin_check` | 工序新增编辑 |
+| `TechnologyFlowModel` | 设定值插件容器 | `type`、`code`、`pluginData`、`rowData`、`processArr`、`is_binding_batch` | 依据工序插件类型编辑设定值 |
+| `ResultParam` | 查看并绑定流程工序结果参数 | `flow_process_id`、`workingsubclass_id` | 结果参数弹窗 |
+| `TemperatureSupp` | 温度补偿工步范围、补偿值维护、Excel 导入、模板下载 | `flow_process_id` | 化成/分容等工序温度补偿 |
+| `CalculationScript` | 计算脚本列表、脚本新增/编辑/删除、接口位置配置 | `flow_process_id` | 流程工序计算脚本配置 |
+| 日志抽屉 | 展示 `technology_flow_operate_log` | `nyr_date`、`week`、`username`、`action_name`、`process_name` | 查看流程卡操作日志 |
+
+## 四、已迁移/本轮补齐内容
+
+| 内容 | 现状 | 本轮处理 |
+| --- | --- | --- |
+| 工艺流程主表 CRUD/复制 | V2 已实现 | 保留 |
+| 流程卡入口 | V2 已实现 | 保留旧路由 `/production_configuration/technology_model/technology_flow/:flow_id/process` |
+| 流程卡工序新增/编辑/删除/排序 | V2 已实现 | 保留并修正按钮显示规则 |
+| 设定值 | V2 已实现简化 JSON 版本 | 保留，继续使用 `set_setting` |
+| 结果参数 | V2 误用工序单元参数组件，缺少 `flow_process_id` 绑定 | 新增流程卡专用 `result-param.vue`，按 `process_id` 查询与绑定 |
+| 温度补偿 | V2 仅提示“暂未接入” | 新增 `temperature-compensation.vue`，恢复查询、工步范围、维护、导入和模板下载 |
+| 计算脚本 | V2 按钮隐藏，仅提示“暂未接入” | 新增 `calculation-script.vue` 和 API，恢复脚本 CRUD |
+| 接口封装 | V2 缺少多个旧端点 | 补齐 `process-routing-card.js` 和新增 `calculation-script.js` |
+| i18n | V2 缺少插件弹窗文本 | 补齐中英文语言项 |
+
+## 五、迁移优先级与依赖
+
+| 优先级 | 内容 | 依赖 | 原因 |
+| --- | --- | --- | --- |
+| P0 | 流程卡工序列表、排序、新增编辑删除 | `technology_flow_process/all/create/edit/delete/move_*` | 流程卡核心作业入口 |
+| P0 | 结果参数按流程工序绑定 | `get_optional_params_details`、`get_all_workingsubclass_params`、`add_optional_params` | 生产下发/报表字段依赖结果参数 |
+| P1 | 温度补偿 | `get_step`、`get_temperature_list`、`create_temperature`、`get_temperature_template`、`xlsx` 工具 | 化成/分容等工序需要温度修正 |
+| P1 | 计算脚本 | `calculation_script/all/create/edit/delete` | 工序接口前后置计算依赖 |
+| P2 | 设定值插件细分 UI | 旧 `TechnologyFlowModel` 各插件 | 当前 V2 为 JSON 维护，后续可恢复各插件可视化表单 |
+| P2 | 日志详情“查看数据” | 操作日志明细接口待确认 | 旧页面仅展示入口文本，实际明细未完整实现 |
+
+## 六、风险与后续建议
+
+- 当前 V2 设定值仍是 JSON 编辑器，不是旧系统按插件类型渲染的专用表单；若业务用户依赖可视化配置，应后续迁移 `SelectionPlugin`、`FormationPlugin`、`OcvrPlugin` 等插件。
+- 计算脚本编辑器使用文本域替代旧 Ace 包装组件，功能可提交，但代码高亮/格式化体验弱于旧系统。
+- 温度补偿 Excel 导入按旧模板中文列名“温度 / 温度补偿值”解析，需要测试真实模板兼容性。

docs/迁移提示词.md

@@ -12,7 +12,7 @@
 - 使用 `useTableColumns()` 生成列定义（不再手动分配 idx）
 - 使用 `useTableButtons()` 生成工具栏按钮和行内按钮（不再分开写 buttonList / tableButtonList）
 - 使用 `i18nMixin(prefix)` 注入 `key()` 和 `ckey()` 方法
-- 参考文档：[表格组件使用说明.md](file:///d:/code/mes/mes-ui/docs/表格组件使用说明.md)
+- 参考文档：[表格组件使用说明.md](/docs/表格组件使用说明.md)
 - 参考示例：`src/views/production-master-data/factory-model/factory-area/index.vue`
 
 #### 1.1 特殊弹出框组件迁移（重要）
@@ -47,7 +47,7 @@ setTimeout 1000ms 关闭      →  保留（树渲染需要等待），但抽取
 ```
 
 ##### 第三步：按标准实现
-参考 [表格组件使用说明.md 第 13 节](file:///d:/code/mes/mes-ui/docs/表格组件使用说明.md#13-特殊弹出框组件规范)，严格遵循：
+参考 [表格组件使用说明.md 第 13 节](/docs/表格组件使用说明.md#13-特殊弹出框组件规范)，严格遵循：
 
 | 规则 | 说明 |
 |------|------|
@@ -59,9 +59,9 @@ setTimeout 1000ms 关闭      →  保留（树渲染需要等待），但抽取
 ##### 第四步：完整案例
 
 参考角色权限分配抽屉的完整迁移：
-- 旧代码：`D:\code\company\SCTMES_MES_V5\vue-app\src\views\system_settings\user_management\role\components\PageMain\index.vue`（`dialogVisibleGive` + `el-tree`）
+- 旧代码：`/home/james/WEBMAN-VUE-APP-develop/src/views/system_settings/user_management/role/components/PageMain/index.vue`（`dialogVisibleGive` + `el-tree`）
-- 新代码：[`src/views/system-administration/user-management/role/components/PermDrawer/index.vue`](file:///d:/code/mes/mes-ui/src/views/system-administration/user-management/role/components/PermDrawer/index.vue)
+- 新代码：[`/home/james/WEBMAN-VUE-APP-V2-develop/mes-ui-d2/src/views/system-administration/user-management/role/components/PermDrawer/index.vue`](/src/views/system-administration/user-management/role/components/PermDrawer/index.vue)
-- 主页面引用：[`src/views/system-administration/user-management/role/index.vue`](file:///d:/code/mes/mes-ui/src/views/system-administration/user-management/role/index.vue#L79-L87)
+- 主页面引用：[`src/views/system-administration/user-management/role/index.vue`](/src/views/system-administration/user-management/role/index.vue#L79-L87)
 
 ---
 
@@ -70,10 +70,10 @@ setTimeout 1000ms 关闭      →  保留（树渲染需要等待），但抽取
 - `data()` 中用 `this.key('xxx')` 传完整 i18n key，**不要用 `k()` 提前翻译**（翻译由 page-table / page-dialog-form 内部处理，切换语言自动响应）
 - 模板搜索区用 `$t(key('xxx'))`，公共 key 用 `$t(ckey('xxx'))`
 - 语言包必须中英文同步添加（`zh-chs.json` + `en.json`）
-- 参考文档：[国际化规则.md](file:///d:/code/mes/mes-ui/docs/国际化规则.md)
+- 参考文档：[国际化规则.md](/docs/国际化规则.md)
 
 #### 3. 文件夹命名（重要）
-- 文件夹名称遵循 [后台Webman界面截图对照表](file:///d:/code/mes/mes-ui/后台Webman界面截图对照表.md) 的 snake_case/kebab-case 命名
+- 文件夹名称遵循 [后台Webman界面截图对照表](/后台Webman界面截图对照表.md) 的 snake_case/kebab-case 命名
 - 目录示例：`src/views/production-master-data/factory-model/factory-area/`
 - 路由模块：`src/router/modules/production-master-data.js`
 - API 文件：`src/api/production-master-data/factory-area.js`
@@ -121,7 +121,7 @@ setTimeout 1000ms 关闭      →  保留（树渲染需要等待），但抽取
 | `page.data_middleground.basic_traceability.*` | `page.data_platform.traceability.*` |
 
 #### 6. 处理流程（每迁移一个页面执行以下步骤）
-1. **确定对照表位置**：从 [后台Webman界面截图对照表](file:///d:/code/mes/mes-ui/后台Webman界面截图对照表.md) 找到对应行的英文名，转换为 snake_case
+1. **确定对照表位置**：从 [后台Webman界面截图对照表](/后台Webman界面截图对照表.md) 找到对应行的英文名，转换为 snake_case
 2. **创建目录结构**：`src/views/{一级snake_case}/{二级snake_case}/{三级snake_case}/`
 3. **创建 API 文件**：`src/api/{一级snake_case}/{二级snake_case}/{三级snake_case}.js`，BASE URL 暂用旧值
 4. **添加路由模块**：`src/router/modules/{一级snake_case}.js`，path 暂用旧值
@@ -141,7 +141,7 @@ setTimeout 1000ms 关闭      →  保留（树渲染需要等待），但抽取
 - **Columns**：`useTableColumns([...])`
 - **Methods**：`fetchData / onSearch / onReset / onPageChange / openAdd / openEdit / onDialogSubmit / handleDelete`
 - **i18n key 模板**（每个页面至少要有这些）：`search / reset / add / edit / delete / operation / add_title / edit_title / code / name / remark / enter_code / enter_name / remark_length / operation_success / confirm / cancel / tip / confirm_delete`
-- **搜索条件过多时**参考 [表格组件使用说明.md - 场景 8](file:///d:/code/mes/mes-ui/docs/表格组件使用说明.md#场景-8折叠式搜索区搜索条件过多时)，使用 `searchExpanded` + `v-show` 实现折叠式搜索区，需额外添加 i18n key：`expand`（展开更多/Expand）、`collapse`（收起/Collapse）
+- **搜索条件过多时**参考 [表格组件使用说明.md - 场景 8](/docs/表格组件使用说明.md#场景-8折叠式搜索区搜索条件过多时)，使用 `searchExpanded` + `v-show` 实现折叠式搜索区，需额外添加 i18n key：`expand`（展开更多/Expand）、`collapse`（收起/Collapse）
 
 #### 6.1 依赖安装
 
@@ -150,7 +150,7 @@ setTimeout 1000ms 关闭      →  保留（树渲染需要等待），但抽取
 1. **包管理器**：本项目使用 **pnpm**，安装命令为 `pnpm add <package-name>`
 2. **安装前检查**：先在 `package.json` 中确认依赖是否已存在，避免重复安装
 3. **版本兼容**：确保安装的包支持 Vue 2.x（本项目为 Vue 2.7）
-4. **参考标准**：[表格组件使用说明.md - 第 11 节](file:///d:/code/mes/mes-ui/docs/表格组件使用说明.md#11-依赖安装规范)
+4. **参考标准**：[表格组件使用说明.md - 第 11 节](/docs/表格组件使用说明.md#11-依赖安装规范)
 
 ---
 

docs/运行提示词.md

@@ -0,0 +1,25 @@
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ṩ<EFBFBD><EFBFBD><EFBFBD>ļ<EFBFBD> Ǩ<><C7A8><EFBFBD><EFBFBD>ʾ<EFBFBD><CABE>.md <20><> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʹ<EFBFBD><CAB9>˵<EFBFBD><CBB5>.md <20><> <20><>̨Webman<61><6E><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͼ<EFBFBD><CDBC><EFBFBD>ձ<EFBFBD>.md <20>е<EFBFBD><D0B5><EFBFBD>Ϣ<EFBFBD><CFA2><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ִ<EFBFBD>С<EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϣ<EFBFBD><CFA2><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD>Ǩ<EFBFBD>ƹ<EFBFBD><C6B9><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ǩ<EFBFBD>ƺ<EFBFBD><C6BA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>һ<EFBFBD><D2BB><EFBFBD><EFBFBD>ϸ<EFBFBD>Ĺ<EFBFBD><C4B9>ܲ<EFBFBD><DCB2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĵ<EFBFBD><C4B5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĵ<EFBFBD><C4B5><EFBFBD><EFBFBD><EFBFBD>Ϊ<EFBFBD><CEAA><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ա<EFBFBD>IJ<EFBFBD><C4B2><EFBFBD>ָ<EFBFBD>ϡ<EFBFBD><CFA1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ա<EFBFBD>谴<EFBFBD><E8B0B4><EFBFBD>ĵ<EFBFBD><C4B5><EFBFBD><EFBFBD><EFBFBD>ִ<EFBFBD>в<EFBFBD><D0B2>ԣ<EFBFBD><D4A3>Բ<EFBFBD><D4B2><EFBFBD>ͨ<EFBFBD><CDA8><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF><EFBFBD>й<EFBFBD>ѡ<EFBFBD><D1A1><EFBFBD>ǣ<EFBFBD><C7A3><EFBFBD>δͨ<CEB4><CDA8><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ<EFBFBD><C4BF>¼<EFBFBD><C2BC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>⡣
+
+<EFBFBD><EFBFBD>ҪҪ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+
+1. <20>˲<EFBFBD><CBB2><EFBFBD><EFBFBD>ĵ<EFBFBD><C4B5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĵ<EFBFBD><C4B5>ķ<EFBFBD>ʽ<EFBFBD><CABD>ÿ<EFBFBD><C3BF><EFBFBD><EFBFBD><EFBFBD>ɹ<EFBFBD><C9B9><EFBFBD>Ǩ<EFBFBD>ƺ󣬽<C6BA><F3A3ACBD>¹<EFBFBD><C2B9>ܵIJ<DCB5><C4B2><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݷŵ<DDB7>ÿ<EFBFBD><C3BF><EFBFBD><EFBFBD><EFBFBD>ܵ<EFBFBD><DCB5><EFBFBD><EFBFBD>ĵ<EFBFBD><C4B5>
+
+2. <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݱ<EFBFBD><DDB1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ϸҪ<CFB8>أ<EFBFBD>
+
+- <20><><EFBFBD>Ի<EFBFBD><D4BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ҫ<EFBFBD><D2AA>
+
+- <20><><EFBFBD><EFBFBD>ǰ<EFBFBD><C7B0><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
+
+- <20><>ϸ<EFBFBD>IJ<EFBFBD><C4B2>Բ<EFBFBD><D4B2>裨ÿ<E8A3A8><C3BF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ȷ˵<C8B7><CBB5><EFBFBD><EFBFBD>
+
+- Ԥ<>ڽ<EFBFBD><DABD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>塢<EFBFBD><E5A1A2><EFBFBD><EFBFBD>֤<EFBFBD><D6A4>
+
+- ʵ<>ʽ<EFBFBD><CABD><EFBFBD><EFBFBD><EFBFBD>¼<EFBFBD><C2BC><EFBFBD><EFBFBD>
+
+- <20><><EFBFBD><EFBFBD>ͨ<EFBFBD><CDA8>/ʧ<><CAA7>״̬<D7B4><CCAC><EFBFBD><EFBFBD>
+
+- <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>¼<EFBFBD><C2BC><EFBFBD><EFBFBD>
+
+3. ȷ<><C8B7><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD≯<EFBFBD><CCB8><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ܵ<EFBFBD><DCB5><EFBFBD><EFBFBD>к<EFBFBD><D0BA>IJ<EFBFBD><C4B2><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>û<EFBFBD><C3BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ѯ<EFBFBD><D1AF><EFBFBD>༭<EFBFBD><E0BCAD>ɾ<EFBFBD><C9BE><EFBFBD><EFBFBD>Ȩ<EFBFBD>޷<EFBFBD><DEB7><EFBFBD><EFBFBD><EFBFBD>
+
+4. <20>ĵ<EFBFBD><C4B5><EFBFBD>ʽӦ<CABD><D3A6><EFBFBD><EFBFBD><EFBFBD>׶<EFBFBD><D7B6><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ڲ<EFBFBD><DAB2><EFBFBD><EFBFBD><EFBFBD>Ա<EFBFBD><D4B1><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ִ<EFBFBD>в<EFBFBD><D0B2><EFBFBD>¼<EFBFBD><C2BC><EFBFBD><EFBFBD>

src/api/production-master-data/calculation-script.js

@@ -0,0 +1,51 @@
+import { request } from '@/api/_service'
+
+const BASE = 'production_configuration/technology_model/calculation_script/'
+
+function apiParams (method, data = {}) {
+  return {
+    method: `production_configuration_technology_model_calculation_script_${method}`,
+    platform: 'background',
+    ...data
+  }
+}
+
+export function getCalculationScriptAll (data) {
+  return request({
+    url: BASE + 'all',
+    method: 'get',
+    params: apiParams('all', data)
+  })
+}
+
+export function getCalculationScriptList (data) {
+  return request({
+    url: BASE + 'list',
+    method: 'get',
+    params: apiParams('list', data)
+  })
+}
+
+export function createCalculationScript (data) {
+  return request({
+    url: BASE + 'create',
+    method: 'post',
+    data: apiParams('create', data)
+  })
+}
+
+export function editCalculationScript (data) {
+  return request({
+    url: BASE + 'edit',
+    method: 'put',
+    data: apiParams('edit', data)
+  })
+}
+
+export function deleteCalculationScript (data) {
+  return request({
+    url: BASE + 'delete',
+    method: 'delete',
+    data: apiParams('delete', data)
+  })
+}

src/api/production-master-data/process-routing-card.js

@@ -65,3 +65,68 @@ export function moveDown (data) {
     data: apiParams('move_down', data)
   })
 }
+
+export function getOptionalParamsDetails (data) {
+  return request({
+    url: BASE + 'get_optional_params_details',
+    method: 'get',
+    params: apiParams('get_optional_params_details', data)
+  })
+}
+
+export function getOptionalAllParamsDetails (data) {
+  return request({
+    url: BASE + 'get_optional_all_params_details',
+    method: 'get',
+    params: apiParams('get_optional_all_params_details', data)
+  })
+}
+
+export function getStep (data) {
+  return request({
+    url: BASE + 'get_step',
+    method: 'get',
+    params: apiParams('get_step', data)
+  })
+}
+
+export function getTemperatureList (data) {
+  return request({
+    url: BASE + 'get_temperature_list',
+    method: 'get',
+    params: apiParams('get_temperature_list', data)
+  })
+}
+
+export function createTemperature (data) {
+  return request({
+    url: BASE + 'create_temperature',
+    method: 'post',
+    data: apiParams('create_temperature', data)
+  })
+}
+
+export function getTemperatureTemplate (data) {
+  return request({
+    url: BASE + 'get_temperature_template',
+    method: 'post',
+    responseType: 'blob',
+    data: apiParams('get_temperature_template', data)
+  })
+}
+
+export function getAllWorkingsubclassParams (data) {
+  return request({
+    url: BASE + 'get_all_workingsubclass_params',
+    method: 'get',
+    params: apiParams('get_all_workingsubclass_params', data)
+  })
+}
+
+export function addOptionalParams (data) {
+  return request({
+    url: BASE + 'add_optional_params',
+    method: 'post',
+    data: apiParams('add_optional_params', data)
+  })
+}

src/locales/en.json

@@ -225,7 +225,69 @@
 						"length_1_100": "Length must be 1-100 characters",
 						"batch_bound_no_move": "Batch bound, cannot move",
 						"select_category": "Please select a category",
-						"log_operation_step": "Operation step: "
+						"log_operation_step": "Operation step: ",
+						"search": "Search",
+						"query": "Query",
+						"close": "Close",
+						"submit": "Submit",
+						"add": "Add",
+						"remove": "Remove",
+						"save": "Save",
+						"edit": "Edit",
+						"name": "Name",
+						"param": "Parameter",
+						"remark": "Remark",
+						"enter_name": "Please enter name",
+						"enter_param": "Please enter parameter",
+						"enter_code": "Please enter code",
+						"enter_remark": "Please enter remark",
+						"add_result_param": "Add Result Params",
+						"result_param_bind_tip": "Select result parameters to bind to the current process step.",
+						"all_result_params": "All Result Params",
+						"selected_result_params": "Selected Result Params",
+						"please_select_param": "Please select result parameters",
+						"temperature_step_range": "Select Temperature Compensation Step Range",
+						"start_step": "Start Step",
+						"end_step": "End Step",
+						"select_start_step": "Please select start step",
+						"select_end_step": "Please select end step",
+						"temperature_data": "Temperature Compensation Data",
+						"import_data": "Import Data",
+						"temperature_value": "Temperature",
+						"compensation_value": "Compensation Value",
+						"import_temperature_data": "Import Temperature Data",
+						"drag_file_here": "Drag file here, or ",
+						"click_to_upload": "click to upload",
+						"download_template": "Download Template",
+						"start_step_greater_than_end": "Start step cannot be greater than end step",
+						"select_at_least_one": "Please select at least one row",
+						"select_start_step_required": "Please select start step",
+						"select_end_step_required": "Please select end step",
+						"temperature_required": "Temperature is required",
+						"compensation_required": "Compensation value is required",
+						"temperature_must_be_numeric": "Temperature must be numeric",
+						"compensation_must_be_numeric": "Compensation value must be numeric",
+						"duplicate_temperature_exists": "Duplicate temperature exists",
+						"temperature_template_name": "Temperature Compensation Import Template",
+						"invalid_upload_format": "Please upload xls or xlsx file",
+						"temperature_import_columns_required": "File must contain Temperature and Compensation columns",
+						"add_calculation_script": "Add Calculation Script",
+						"edit_calculation_script": "Edit Calculation Script",
+						"script_code": "Script Code",
+						"script_name": "Script Name",
+						"interface_name": "Interface Name",
+						"interface_position": "Interface Position",
+						"start_position": "Start Position",
+						"end_position": "End Position",
+						"status": "Status",
+						"enabled": "Enabled",
+						"disabled": "Disabled",
+						"select_interface": "Please select interface",
+						"select_interface_position": "Please select interface position",
+						"script_content": "Script Content",
+						"script_content_required": "Please enter script content",
+						"length_1_45": "Length must be 1-45 characters",
+						"confirm_delete_script": "Are you sure to delete this calculation script?"
 					}
 				}
 			},

src/locales/zh-chs.json

@@ -191,7 +191,7 @@
 					"card": {
 						"flow_info": "工艺信息",
 						"flow_name": "流程名称",
-						"category": "流程类别",
+						"category": "类别",
 						"product": "产品型号",
 						"batch_bound": "绑定批次",
 						"yes": "是",
@@ -225,7 +225,69 @@
 						"length_1_100": "长度在 1 到 100 个字符",
 						"batch_bound_no_move": "已绑定批次，不可移动",
 						"select_category": "请选择流程类别",
-						"log_operation_step": "操作工序："
+						"log_operation_step": "操作工序：",
+						"search": "搜索",
+						"query": "查询",
+						"close": "关闭",
+						"submit": "提交",
+						"add": "新增",
+						"remove": "移除",
+						"save": "保存",
+						"edit": "编辑",
+						"name": "名称",
+						"param": "参数",
+						"remark": "备注",
+						"enter_name": "请输入名称",
+						"enter_param": "请输入参数",
+						"enter_code": "请输入编码",
+						"enter_remark": "请输入备注",
+						"add_result_param": "添加结果参数",
+						"result_param_bind_tip": "请选择需要绑定到当前流程工序的结果参数。",
+						"all_result_params": "全部结果参数",
+						"selected_result_params": "已选结果参数",
+						"please_select_param": "请选择结果参数",
+						"temperature_step_range": "选择温度补偿工步范围",
+						"start_step": "开始工步",
+						"end_step": "结束工步",
+						"select_start_step": "请选择开始工步",
+						"select_end_step": "请选择结束工步",
+						"temperature_data": "录入温度补偿数据",
+						"import_data": "导入数据",
+						"temperature_value": "温度",
+						"compensation_value": "温度补偿值",
+						"import_temperature_data": "导入温度补偿数据",
+						"drag_file_here": "将文件拖到此处，或",
+						"click_to_upload": "点击上传",
+						"download_template": "下载模板",
+						"start_step_greater_than_end": "开始工步不能大于结束工步",
+						"select_at_least_one": "请至少选择一条数据",
+						"select_start_step_required": "请选择开始工步",
+						"select_end_step_required": "请选择结束工步",
+						"temperature_required": "温度不能为空",
+						"compensation_required": "温度补偿值不能为空",
+						"temperature_must_be_numeric": "温度必须为数字",
+						"compensation_must_be_numeric": "温度补偿值必须为数字",
+						"duplicate_temperature_exists": "存在重复温度值，请检查",
+						"temperature_template_name": "温度补偿导入模板",
+						"invalid_upload_format": "请上传 xls 或 xlsx 文件",
+						"temperature_import_columns_required": "文件必须包含【温度】和【温度补偿值】两列",
+						"add_calculation_script": "新增计算脚本",
+						"edit_calculation_script": "编辑计算脚本",
+						"script_code": "脚本编码",
+						"script_name": "脚本名称",
+						"interface_name": "接口名称",
+						"interface_position": "接口位置",
+						"start_position": "开始位置",
+						"end_position": "结束位置",
+						"status": "状态",
+						"enabled": "启用",
+						"disabled": "禁用",
+						"select_interface": "请选择接口",
+						"select_interface_position": "请选择接口位置",
+						"script_content": "脚本内容",
+						"script_content_required": "请输入脚本内容",
+						"length_1_45": "长度在 1 到 45 个字符",
+						"confirm_delete_script": "确定要删除该计算脚本吗?"
 					}
 				}
 			},

src/views/production-master-data/process-model/process-routing-card/components/calculation-script.vue

@@ -0,0 +1,235 @@
+<template>
+  <el-dialog :title="$t(title)" :visible.sync="visible" append-to-body :close-on-click-modal="false" width="70%" :before-close="handleClose">
+    <div class="toolbar">
+      <el-button type="primary" size="mini" icon="el-icon-plus" @click="openAdd">
+        {{ $t(key('add_calculation_script')) }}
+      </el-button>
+    </div>
+    <el-table :data="tableData" border height="480" v-loading="loading">
+      <el-table-column prop="id" label="ID" width="70" />
+      <el-table-column prop="code" :label="$t(key('script_code'))" min-width="130" show-overflow-tooltip />
+      <el-table-column prop="name" :label="$t(key('script_name'))" min-width="150" show-overflow-tooltip />
+      <el-table-column prop="interface_code" :label="$t(key('interface_name'))" min-width="220" show-overflow-tooltip />
+      <el-table-column :label="$t(key('interface_position'))" width="130">
+        <template slot-scope="{ row }">
+          {{ row.interface_position === 'begin' ? $t(key('start_position')) : $t(key('end_position')) }}
+        </template>
+      </el-table-column>
+      <el-table-column :label="$t(key('status'))" width="110">
+        <template slot-scope="{ row }">
+          <span v-if="Number(row.status) === 1" class="status-on"><i class="el-icon-circle-check" /> {{ $t(key('enabled')) }}</span>
+          <span v-else class="status-off"><i class="el-icon-circle-close" /> {{ $t(key('disabled')) }}</span>
+        </template>
+      </el-table-column>
+      <el-table-column prop="remark" :label="$t(key('remark'))" show-overflow-tooltip />
+      <el-table-column :label="$t(key('operation'))" width="150" fixed="right">
+        <template slot-scope="{ row }">
+          <el-button type="text" size="mini" icon="el-icon-edit" @click="openEdit(row)">{{ $t(key('edit')) }}</el-button>
+          <el-button type="text" size="mini" icon="el-icon-delete" style="color:#F56C6C" @click="handleDelete(row)">{{ $t(key('delete')) }}</el-button>
+        </template>
+      </el-table-column>
+    </el-table>
+
+    <el-dialog :title="$t(dialogTitle)" :visible.sync="formVisible" append-to-body width="900px" :close-on-click-modal="false">
+      <el-row :gutter="20">
+        <el-col :span="10">
+          <el-form ref="form" :model="formData" :rules="rules" label-width="120px">
+            <el-form-item :label="$t(key('script_code'))" prop="code">
+              <el-input v-model="formData.code" :placeholder="$t(key('enter_code'))" clearable />
+            </el-form-item>
+            <el-form-item :label="$t(key('script_name'))" prop="name">
+              <el-input v-model="formData.name" :placeholder="$t(key('enter_name'))" clearable />
+            </el-form-item>
+            <el-form-item :label="$t(key('interface_name'))" prop="interface_code">
+              <el-select v-model="formData.interface_code" :placeholder="$t(key('select_interface'))" clearable filterable style="width:100%">
+                <el-option v-for="item in interfaceOptions" :key="item.value" :label="item.label" :value="item.value" />
+              </el-select>
+            </el-form-item>
+            <el-form-item :label="$t(key('interface_position'))" prop="interface_position">
+              <el-select v-model="formData.interface_position" :placeholder="$t(key('select_interface_position'))" clearable style="width:100%">
+                <el-option :label="$t(key('start_position'))" value="begin" />
+                <el-option :label="$t(key('end_position'))" value="end" />
+              </el-select>
+            </el-form-item>
+            <el-form-item :label="$t(key('status'))" prop="status">
+              <el-radio-group v-model="formData.status">
+                <el-radio label="1">{{ $t(key('enabled')) }}</el-radio>
+                <el-radio label="0">{{ $t(key('disabled')) }}</el-radio>
+              </el-radio-group>
+            </el-form-item>
+            <el-form-item :label="$t(key('remark'))">
+              <el-input v-model="formData.remark" type="textarea" :rows="4" :placeholder="$t(key('enter_remark'))" />
+            </el-form-item>
+          </el-form>
+        </el-col>
+        <el-col :span="14">
+          <div class="script-editor-title">{{ $t(key('script_content')) }}</div>
+          <el-input v-model="scriptContent" type="textarea" :rows="20" class="script-editor" :placeholder="$t(key('script_content_required'))" />
+        </el-col>
+      </el-row>
+      <span slot="footer">
+        <el-button @click="formVisible = false">{{ $t(key('cancel')) }}</el-button>
+        <el-button type="primary" :loading="submitting" @click="submitForm">{{ $t(key('confirm')) }}</el-button>
+      </span>
+    </el-dialog>
+  </el-dialog>
+</template>
+
+<script>
+import { i18nMixin } from '@/composables/useI18n'
+import {
+  getCalculationScriptAll,
+  createCalculationScript,
+  editCalculationScript,
+  deleteCalculationScript
+} from '@/api/production-master-data/calculation-script'
+
+export default {
+  name: 'ProcessRoutingCardCalculationScript',
+  mixins: [i18nMixin('page.production_master_data.process_model.process_routing.card')],
+  props: {
+    title: { type: String, default: '' },
+    visible: { type: Boolean, default: false },
+    flowProcessId: { type: [String, Number], default: '' }
+  },
+  data () {
+    return {
+      loading: false,
+      submitting: false,
+      tableData: [],
+      formVisible: false,
+      dialogTitle: '',
+      handleType: 'create',
+      editId: '',
+      scriptContent: '',
+      formData: { code: '', name: '', interface_code: '', interface_position: '', status: '1', remark: '' },
+      interfaceOptions: [
+        { label: 'set_battery_process_result（成品段下料接口）', value: 'set_battery_process_result' },
+        { label: 'set_material_input（制片段上料接口）', value: 'set_material_input' },
+        { label: 'get_battery_process_route（电芯路由接口）', value: 'get_battery_process_route' },
+        { label: 'set_wip_output_by_item_id（裸电芯下料接口）', value: 'set_wip_output_by_item_id' },
+        { label: 'set_tray_process_result（托盘下料接口）', value: 'set_tray_process_result' }
+      ],
+      rules: {
+        code: [
+          { required: true, message: this.key('enter_code'), trigger: 'blur' },
+          { min: 1, max: 45, message: this.key('length_1_45'), trigger: 'blur' }
+        ],
+        name: [
+          { required: true, message: this.key('enter_name'), trigger: 'blur' },
+          { min: 1, max: 45, message: this.key('length_1_45'), trigger: 'blur' }
+        ],
+        interface_code: [{ required: true, message: this.key('select_interface'), trigger: 'change' }],
+        interface_position: [{ required: true, message: this.key('select_interface_position'), trigger: 'change' }]
+      }
+    }
+  },
+  watch: {
+    visible (val) {
+      if (val) this.fetchData()
+    },
+    flowProcessId (val) {
+      if (val && this.visible) this.fetchData()
+    }
+  },
+  methods: {
+    handleClose () {
+      this.$emit('close')
+    },
+    async fetchData () {
+      if (!this.flowProcessId) return
+      this.loading = true
+      try {
+        const res = await getCalculationScriptAll({ process_id: this.flowProcessId })
+        this.tableData = (res && res.data) || res || []
+      } finally {
+        this.loading = false
+      }
+    },
+    resetForm () {
+      this.formData = { code: '', name: '', interface_code: '', interface_position: '', status: '1', remark: '' }
+      this.scriptContent = ''
+      this.editId = ''
+      this.$nextTick(() => this.$refs.form && this.$refs.form.clearValidate())
+    },
+    openAdd () {
+      this.handleType = 'create'
+      this.dialogTitle = this.key('add_calculation_script')
+      this.resetForm()
+      this.formVisible = true
+    },
+    openEdit (row) {
+      this.handleType = 'edit'
+      this.dialogTitle = this.key('edit_calculation_script')
+      this.editId = row.id
+      this.formData = {
+        code: row.code || '',
+        name: row.name || '',
+        interface_code: row.interface_code || '',
+        interface_position: row.interface_position || '',
+        status: row.status !== undefined ? String(row.status) : '1',
+        remark: row.remark || ''
+      }
+      this.scriptContent = row.calculation_script_content || ''
+      this.formVisible = true
+    },
+    submitForm () {
+      this.$refs.form.validate(async valid => {
+        if (!valid) return
+        if (!this.scriptContent) {
+          this.$message.error(this.$t(this.key('script_content_required')))
+          return
+        }
+        this.submitting = true
+        try {
+          const payload = {
+            ...this.formData,
+            process_id: this.flowProcessId,
+            calculation_script_content: this.scriptContent
+          }
+          if (this.handleType === 'create') {
+            await createCalculationScript(payload)
+          } else {
+            await editCalculationScript({ ...payload, id: this.editId })
+          }
+          this.$message.success(this.$t(this.key('operation_success')))
+          this.formVisible = false
+          this.fetchData()
+        } finally {
+          this.submitting = false
+        }
+      })
+    },
+    async handleDelete (row) {
+      await this.$confirm(this.$t(this.key('confirm_delete_script')), this.$t(this.key('tip')), {
+        confirmButtonText: this.$t(this.key('confirm')),
+        cancelButtonText: this.$t(this.key('cancel')),
+        type: 'warning',
+        closeOnClickModal: false
+      })
+      await deleteCalculationScript({ id: row.id })
+      this.$message.success(this.$t(this.key('operation_success')))
+      this.fetchData()
+    }
+  }
+}
+</script>
+
+<style scoped>
+.toolbar {
+  margin-bottom: 10px;
+}
+.status-on {
+  color: #67C23A;
+}
+.status-off {
+  color: #F56C6C;
+}
+.script-editor-title {
+  margin-bottom: 8px;
+  color: #606266;
+}
+.script-editor /deep/ textarea {
+  font-family: Menlo, Consolas, monospace;
+}
+</style>

src/views/production-master-data/process-model/process-routing-card/components/result-param.vue

@@ -0,0 +1,253 @@
+<template>
+  <el-dialog
+    :title="$t(title)"
+    :visible.sync="visible"
+    append-to-body
+    :close-on-click-modal="false"
+    width="80%"
+    :before-close="handleClose"
+  >
+    <div class="result-param-layout">
+      <el-card class="filter-panel" shadow="never">
+        <div slot="header">
+          <span>{{ $t(key('search')) }}</span>
+          <el-button type="text" style="float:right;padding:3px 0" @click="onSearch">
+            {{ $t(key('query')) }}
+          </el-button>
+        </div>
+        <el-form label-position="top" :model="searchForm" size="mini">
+          <el-form-item :label="$t(key('name'))">
+            <el-input v-model.trim="searchForm.name" :placeholder="$t(key('enter_name'))" clearable />
+          </el-form-item>
+          <el-form-item :label="$t(key('param'))">
+            <el-input v-model.trim="searchForm.code" :placeholder="$t(key('enter_param'))" clearable />
+          </el-form-item>
+        </el-form>
+      </el-card>
+
+      <div class="table-panel">
+        <div class="table-actions">
+          <el-button type="primary" size="mini" icon="el-icon-plus" @click="openBindDialog">
+            {{ $t(key('add_result_param')) }}
+          </el-button>
+        </div>
+        <el-table :data="tableData" v-loading="loading" border height="480">
+          <el-table-column prop="name" :label="$t(key('name'))" width="220" show-overflow-tooltip />
+          <el-table-column prop="code" :label="$t(key('param'))" width="180" show-overflow-tooltip />
+          <el-table-column prop="field_type" :label="$t(key('category'))" width="140" />
+          <el-table-column prop="remark" :label="$t(key('remark'))" show-overflow-tooltip />
+        </el-table>
+      </div>
+    </div>
+
+    <el-pagination
+      style="margin-top:12px;text-align:right"
+      :current-page="pagination.current"
+      :page-size="pagination.size"
+      :page-sizes="[10, 20, 50, 100]"
+      :total="pagination.total"
+      layout="total, sizes, prev, pager, next, jumper"
+      @size-change="onSizeChange"
+      @current-change="onCurrentChange"
+    />
+
+    <div slot="footer">
+      <el-button @click="handleClose">{{ $t(key('close')) }}</el-button>
+    </div>
+
+    <el-dialog
+      :title="$t(key('add_result_param'))"
+      :visible.sync="bindVisible"
+      append-to-body
+      width="720px"
+      :close-on-click-modal="false"
+    >
+      <el-alert :title="$t(key('result_param_bind_tip'))" type="warning" :closable="false" show-icon />
+      <div class="bind-layout">
+        <el-card class="bind-card" shadow="never">
+          <div slot="header">
+            <span>{{ $t(key('all_result_params')) }}</span>
+            <el-button type="text" style="float:right;padding:3px 0">{{ checkedCount }} / {{ leftParams.length }}</el-button>
+          </div>
+          <el-tree
+            ref="leftTree"
+            :data="leftParams"
+            show-checkbox
+            node-key="code"
+            accordion
+            :check-strictly="true"
+            :default-checked-keys="defaultCheckedKeys"
+            :props="treeProps"
+            @check="onTreeCheck"
+          />
+        </el-card>
+        <div class="bind-arrow">
+          <el-button type="primary" icon="el-icon-arrow-right" circle @click="syncRightParams" />
+        </div>
+        <el-card class="bind-card" shadow="never">
+          <div slot="header">
+            <span>{{ $t(key('selected_result_params')) }}</span>
+            <el-button type="text" style="float:right;padding:3px 0">{{ rightParams.length }}</el-button>
+          </div>
+          <el-tree :data="rightParams" node-key="code" :props="treeProps" />
+        </el-card>
+      </div>
+      <span slot="footer">
+        <el-button size="mini" @click="bindVisible = false">{{ $t(key('cancel')) }}</el-button>
+        <el-button size="mini" type="primary" @click="submitBindParams">{{ $t(key('submit')) }}</el-button>
+      </span>
+    </el-dialog>
+  </el-dialog>
+</template>
+
+<script>
+import { i18nMixin } from '@/composables/useI18n'
+import {
+  getOptionalParamsDetails,
+  getAllWorkingsubclassParams,
+  addOptionalParams
+} from '@/api/production-master-data/process-routing-card'
+
+function readListData (res) {
+  const data = res && res.data ? res.data : res
+  if (!data) return { list: [], total: 0 }
+  if (Array.isArray(data)) return { list: data, total: data.length }
+  const list = data.data || data.list || []
+  return { list: Array.isArray(list) ? list : [], total: Number(data.count || data.total || list.length || 0) }
+}
+
+export default {
+  name: 'ProcessRoutingCardResultParam',
+  mixins: [i18nMixin('page.production_master_data.process_model.process_routing.card')],
+  props: {
+    title: { type: String, default: '' },
+    visible: { type: Boolean, default: false },
+    workingsubclassId: { type: [String, Number], default: '' },
+    flowProcessId: { type: [String, Number], default: '' }
+  },
+  data () {
+    return {
+      loading: false,
+      tableData: [],
+      searchForm: { name: '', code: '' },
+      pagination: { current: 1, size: 10, total: 0 },
+      bindVisible: false,
+      leftParams: [],
+      rightParams: [],
+      defaultCheckedKeys: [],
+      selectedCodes: [],
+      changed: false,
+      treeProps: { children: 'children', label: 'label' }
+    }
+  },
+  computed: {
+    checkedCount () {
+      return this.selectedCodes.length
+    }
+  },
+  watch: {
+    visible (val) {
+      if (val) this.fetchData(true)
+    },
+    flowProcessId (val) {
+      if (val && this.visible) this.fetchData(true)
+    }
+  },
+  methods: {
+    handleClose () {
+      this.pagination.current = 1
+      this.pagination.size = 10
+      this.$emit('close')
+    },
+    onSearch () {
+      this.fetchData(true)
+    },
+    onSizeChange (size) {
+      this.pagination.size = size
+      this.fetchData(true)
+    },
+    onCurrentChange (current) {
+      this.pagination.current = current
+      this.fetchData(false)
+    },
+    async fetchData (resetPage = false) {
+      if (!this.flowProcessId) return
+      if (resetPage) this.pagination.current = 1
+      this.loading = true
+      try {
+        const res = await getOptionalParamsDetails({
+          page_no: this.pagination.current,
+          page_size: this.pagination.size,
+          process_id: this.flowProcessId,
+          ...this.searchForm
+        })
+        const { list, total } = readListData(res)
+        this.tableData = list
+        this.pagination.total = total
+      } finally {
+        this.loading = false
+      }
+    },
+    async openBindDialog () {
+      if (!this.flowProcessId) return
+      const res = await getAllWorkingsubclassParams({ process_id: this.flowProcessId })
+      const data = res && res.data ? res.data : res || {}
+      this.leftParams = data.left_optional_params || []
+      this.rightParams = data.right_optional_params || []
+      this.defaultCheckedKeys = data.default_checked_keys || []
+      this.selectedCodes = [...this.defaultCheckedKeys]
+      this.changed = false
+      this.bindVisible = true
+    },
+    onTreeCheck () {
+      this.selectedCodes = this.$refs.leftTree ? this.$refs.leftTree.getCheckedKeys() : []
+      this.changed = true
+    },
+    syncRightParams () {
+      const checked = this.$refs.leftTree ? this.$refs.leftTree.getCheckedNodes() : []
+      this.rightParams = checked.map(item => ({ ...item }))
+      this.changed = true
+    },
+    async submitBindParams () {
+      if (!this.changed) {
+        this.$message.error(this.$t(this.key('please_select_param')))
+        return
+      }
+      await addOptionalParams({
+        process_id: this.flowProcessId,
+        optional_params: JSON.stringify(this.rightParams)
+      })
+      this.$message.success(this.$t(this.key('operation_success')))
+      this.bindVisible = false
+      this.fetchData(true)
+    }
+  }
+}
+</script>
+
+<style scoped>
+.result-param-layout,
+.bind-layout {
+  display: flex;
+  gap: 16px;
+}
+.filter-panel {
+  width: 220px;
+  flex: none;
+}
+.table-panel {
+  flex: 1;
+  min-width: 0;
+}
+.table-actions {
+  margin-bottom: 10px;
+}
+.bind-card {
+  width: 300px;
+  min-height: 360px;
+}
+.bind-arrow {
+  display: flex;
+  align-items: center;
+}
+</style>

src/views/production-master-data/process-model/process-routing-card/components/temperature-compensation.vue

@@ -0,0 +1,209 @@
+<template>
+  <el-drawer :visible.sync="visible" :wrapper-closable="false" :with-header="false" size="50%">
+    <div class="drawer-title">
+      <el-page-header @back="handleClose" :content="$t(title)" />
+    </div>
+
+    <div class="section">
+      <div class="section-title">| {{ $t(key('temperature_step_range')) }}</div>
+      <el-form :inline="true" :model="formTemp" size="mini">
+        <el-form-item :label="$t(key('start_step'))">
+          <el-select v-model="formTemp.start_work_step_id" :placeholder="$t(key('select_start_step'))" @change="checkStepRange">
+            <el-option v-for="item in stepOptions" :key="item.id" :label="item.suffix_name || item.name" :value="item.id" />
+          </el-select>
+        </el-form-item>
+        <el-form-item :label="$t(key('end_step'))">
+          <el-select v-model="formTemp.end_work_step_id" :placeholder="$t(key('select_end_step'))" @change="checkStepRange">
+            <el-option v-for="item in stepOptions" :key="item.id" :label="item.suffix_name || item.name" :value="item.id" />
+          </el-select>
+        </el-form-item>
+      </el-form>
+    </div>
+
+    <div class="section">
+      <div class="section-title">| {{ $t(key('temperature_data')) }}</div>
+      <div class="toolbar">
+        <el-button size="mini" icon="el-icon-plus" @click="addRow">{{ $t(key('add')) }}</el-button>
+        <el-button size="mini" icon="el-icon-delete" @click="removeRows">{{ $t(key('remove')) }}</el-button>
+        <el-button size="mini" type="primary" icon="el-icon-check" @click="saveRows">{{ $t(key('save')) }}</el-button>
+        <el-button size="mini" icon="el-icon-upload2" @click="importVisible = true">{{ $t(key('import_data')) }}</el-button>
+      </div>
+      <el-table ref="table" :data="tableData" border height="560" @selection-change="selectedRows = $event">
+        <el-table-column type="selection" width="48" />
+        <el-table-column :label="$t(key('temperature_value'))" min-width="160">
+          <template slot-scope="{ row }">
+            <el-input v-model="row.temperature" size="mini" />
+          </template>
+        </el-table-column>
+        <el-table-column :label="$t(key('compensation_value'))" min-width="160">
+          <template slot-scope="{ row }">
+            <el-input v-model="row.compensation_value" size="mini" />
+          </template>
+        </el-table-column>
+      </el-table>
+    </div>
+
+    <el-dialog :title="$t(key('import_temperature_data'))" :visible.sync="importVisible" append-to-body width="420px">
+      <el-upload
+        drag
+        action=""
+        :auto-upload="false"
+        :show-file-list="false"
+        accept=".xls,.xlsx"
+        :on-change="onFileChange"
+      >
+        <i class="el-icon-upload" />
+        <div class="el-upload__text">{{ $t(key('drag_file_here')) }}<em>{{ $t(key('click_to_upload')) }}</em></div>
+        <div slot="tip" class="el-upload__tip">{{ fileName }}</div>
+      </el-upload>
+      <span slot="footer">
+        <el-button type="primary" :loading="templateLoading" @click="downloadTemplate">{{ $t(key('download_template')) }}</el-button>
+      </span>
+    </el-dialog>
+  </el-drawer>
+</template>
+
+<script>
+import { i18nMixin } from '@/composables/useI18n'
+import { getStep, getTemperatureList, createTemperature, getTemperatureTemplate } from '@/api/production-master-data/process-routing-card'
+import { downloadRename, readExcel } from '@/utils/file'
+
+export default {
+  name: 'ProcessRoutingCardTemperatureCompensation',
+  mixins: [i18nMixin('page.production_master_data.process_model.process_routing.card')],
+  props: {
+    title: { type: String, default: '' },
+    visible: { type: Boolean, default: false },
+    flowProcessId: { type: [String, Number], default: '' }
+  },
+  data () {
+    return {
+      formTemp: { start_work_step_id: '', end_work_step_id: '' },
+      stepOptions: [],
+      tableData: [],
+      selectedRows: [],
+      importVisible: false,
+      fileName: '',
+      templateLoading: false
+    }
+  },
+  watch: {
+    visible (val) {
+      if (val) this.bootstrap()
+    }
+  },
+  methods: {
+    handleClose () {
+      this.$emit('close')
+    },
+    async bootstrap () {
+      await Promise.all([this.loadSteps(), this.loadTemperatureList()])
+    },
+    async loadSteps () {
+      const res = await getStep({})
+      this.stepOptions = (res && res.data) || res || []
+    },
+    async loadTemperatureList () {
+      if (!this.flowProcessId) return
+      const res = await getTemperatureList({ process_id: this.flowProcessId })
+      const data = (res && res.data) || res || {}
+      this.tableData = data.data || []
+      this.formTemp.start_work_step_id = data.start_work_step_id || ''
+      this.formTemp.end_work_step_id = data.end_work_step_id || ''
+    },
+    checkStepRange () {
+      const start = Number(this.formTemp.start_work_step_id)
+      const end = Number(this.formTemp.end_work_step_id)
+      if (start && end && start > end) this.$message.warning(this.$t(this.key('start_step_greater_than_end')))
+    },
+    addRow () {
+      this.tableData.push({ temperature: '', compensation_value: '' })
+    },
+    removeRows () {
+      if (!this.selectedRows.length) {
+        this.$message.error(this.$t(this.key('select_at_least_one')))
+        return
+      }
+      this.tableData = this.tableData.filter(row => !this.selectedRows.includes(row))
+    },
+    validateRows () {
+      if (!this.formTemp.start_work_step_id) return this.$t(this.key('select_start_step_required'))
+      if (!this.formTemp.end_work_step_id) return this.$t(this.key('select_end_step_required'))
+      const seen = {}
+      for (const row of this.tableData) {
+        if (row.temperature === '' || row.temperature === null || row.temperature === undefined) return this.$t(this.key('temperature_required'))
+        if (row.compensation_value === '' || row.compensation_value === null || row.compensation_value === undefined) return this.$t(this.key('compensation_required'))
+        if (!/^[-]?\d+(\.\d+)?$/.test(String(row.temperature))) return this.$t(this.key('temperature_must_be_numeric'))
+        if (!/^[-]?\d+(\.\d+)?$/.test(String(row.compensation_value))) return this.$t(this.key('compensation_must_be_numeric'))
+        if (seen[row.temperature]) return this.$t(this.key('duplicate_temperature_exists'))
+        seen[row.temperature] = true
+      }
+      return ''
+    },
+    async saveRows () {
+      const error = this.validateRows()
+      if (error) {
+        this.$message.error(error)
+        return
+      }
+      await createTemperature({
+        temp_data: this.tableData,
+        start_work_step_id: this.formTemp.start_work_step_id,
+        end_work_step_id: this.formTemp.end_work_step_id,
+        process_id: this.flowProcessId
+      })
+      this.$message.success(this.$t(this.key('operation_success')))
+      this.loadTemperatureList()
+    },
+    async downloadTemplate () {
+      this.templateLoading = true
+      try {
+        const res = await getTemperatureTemplate({})
+        downloadRename(res, 'xlsx', this.$t(this.key('temperature_template_name')))
+      } finally {
+        this.templateLoading = false
+      }
+    },
+    async onFileChange (file) {
+      if (!file || !/\.(xls|xlsx)$/i.test(file.name)) {
+        this.$message.error(this.$t(this.key('invalid_upload_format')))
+        return
+      }
+      this.fileName = file.name
+      const rows = await readExcel(file.raw)
+      const next = [...this.tableData]
+      for (const row of rows) {
+        if (!Object.prototype.hasOwnProperty.call(row, '温度') || !Object.prototype.hasOwnProperty.call(row, '温度补偿值')) {
+          this.$message.error(this.$t(this.key('temperature_import_columns_required')))
+          return
+        }
+        if (next.some(item => String(item.temperature) === String(row['温度']))) {
+          this.$message.error(this.$t(this.key('duplicate_temperature_exists')))
+          return
+        }
+        next.push({ temperature: row['温度'], compensation_value: row['温度补偿值'] })
+      }
+      this.tableData = next.sort((a, b) => Number(a.temperature) - Number(b.temperature))
+      this.importVisible = false
+    }
+  }
+}
+</script>
+
+<style scoped>
+.drawer-title {
+  padding: 20px 0 20px 20px;
+  border-bottom: 1px solid #dcdfe6;
+}
+.section {
+  margin: 20px;
+}
+.section-title {
+  margin-bottom: 16px;
+  color: #409EFF;
+  font-size: 14px;
+}
+.toolbar {
+  margin-bottom: 10px;
+}
+</style>

src/views/production-master-data/process-model/process-routing-card/index.vue

@@ -79,7 +79,7 @@
             v-if="$permission(btn.auth) && __judgeRowButton(row, btn.key)"
             @click="btn.onClick(row, index)"
           >
-            {{ btn.label }}
+            {{ $t(btn.label) }}
           </i>
         </strong>
       </template>
@@ -116,9 +116,24 @@
       :visible.sync="resultVisible"
       :title="resultTitle"
       :workingsubclass-id="resultWorkingsubclassId"
+      :flow-process-id="resultFlowProcessId"
       @close="resultVisible = false"
     />
 
+    <temperature-compensation
+      :visible.sync="temperatureVisible"
+      :title="temperatureTitle"
+      :flow-process-id="temperatureFlowProcessId"
+      @close="temperatureVisible = false"
+    />
+
+    <calculation-script
+      :visible.sync="calculationVisible"
+      :title="calculationTitle"
+      :flow-process-id="calculationFlowProcessId"
+      @close="calculationVisible = false"
+    />
+
     <el-drawer
       :title="$t(key('view_log'))"
       :visible.sync="drawer"
@@ -177,11 +192,13 @@ import { getWorkingsubclassAll } from '@/api/production-master-data/process-step
 import PageTable from '@/components/page-table'
 import PageDialogForm from '@/components/page-dialog-form'
 import TechnologyFlowModel from '../process-step/components/technology-flow-model.vue'
-import ResultParam from '../process-step/components/result-param.vue'
+import ResultParam from './components/result-param.vue'
+import TemperatureCompensation from './components/temperature-compensation.vue'
+import CalculationScript from './components/calculation-script.vue'
 
 export default {
   name: 'production-master-data-process-routing-card',
-  components: { PageTable, PageDialogForm, TechnologyFlowModel, ResultParam },
+  components: { PageTable, PageDialogForm, TechnologyFlowModel, ResultParam, TemperatureCompensation, CalculationScript },
   mixins: [i18nMixin('page.production_master_data.process_model.process_routing.card'), confirmMixin],
   data () {
     return {
@@ -210,6 +227,13 @@ export default {
       resultVisible: false,
       resultTitle: '',
       resultWorkingsubclassId: '',
+      resultFlowProcessId: '',
+      temperatureVisible: false,
+      temperatureTitle: '',
+      temperatureFlowProcessId: '',
+      calculationVisible: false,
+      calculationTitle: '',
+      calculationFlowProcessId: '',
       formData: {
         workingsubclass_id: '',
         code: '',
@@ -322,7 +346,7 @@ export default {
     this.rowOperationButtons = [
       {
         key: 'edit',
-        label: '编辑',
+        label: this.key('edit'),
         icon: 'el-icon-edit',
         cssStyle: { marginRight: '10px', cursor: 'pointer' },
         auth: '/production_configuration/technology_model/technology_flow_process/edit',
@@ -330,7 +354,7 @@ export default {
       },
       {
         key: 'delete',
-        label: '删除',
+        label: this.key('delete'),
         icon: 'el-icon-delete',
         cssStyle: { color: 'red', marginRight: '10px', cursor: 'pointer' },
         auth: '/production_configuration/technology_model/technology_flow_process/delete',
@@ -338,7 +362,7 @@ export default {
       },
       {
         key: 'setting',
-        label: '设定值',
+        label: this.key('setting'),
         icon: 'el-icon-setting',
         cssStyle: { color: '#409EFF', marginRight: '10px', cursor: 'pointer' },
         auth: '/production_configuration/technology_model/technology_flow_process/setting',
@@ -346,7 +370,7 @@ export default {
       },
       {
         key: 'resultParam',
-        label: '结果参数',
+        label: this.key('result_param'),
         icon: 'el-icon-s-promotion',
         cssStyle: { color: '#E6A23C', marginRight: '10px', cursor: 'pointer' },
         auth: '/production_configuration/technology_model/technology_flow_process/result_params',
@@ -354,7 +378,7 @@ export default {
       },
       {
         key: 'temperature',
-        label: '温度补偿',
+        label: this.key('temperature'),
         icon: 'el-icon-magic-stick',
         cssStyle: { color: '#67C23A', marginRight: '10px', cursor: 'pointer' },
         auth: '/production_configuration/technology_model/technology_flow_process/temperature',
@@ -362,7 +386,7 @@ export default {
       },
       {
         key: 'calculationScript',
-        label: '计算脚本',
+        label: this.key('calculation_script'),
         icon: 'el-icon-monitor',
         cssStyle: { color: '#67C23A', marginRight: '10px', cursor: 'pointer' },
         auth: '/production_configuration/technology_model/technology_flow_process/calculation_script',
@@ -398,10 +422,10 @@ export default {
       if (key === 'delete' && !this.isBindingBatch) return true
       if (key === 'temperature' &&
         ['FORMATION', 'YC', 'HC', 'IC', 'FORMATION_SS'].indexOf(row.device_category_code) !== -1) {
-        return false
+        return true
       }
       if (key === 'resultParam') return true
-      if (key === 'calculationScript') return false
+      if (key === 'calculationScript') return true
       if (key === 'edit') return true
       return false
     },
@@ -559,13 +583,18 @@ export default {
     openResultParamDrawer (row) {
       this.resultTitle = this.key('result_param')
       this.resultWorkingsubclassId = row.workingsubclass_id || ''
+      this.resultFlowProcessId = row.id || ''
       this.resultVisible = true
     },
     openTemperatureDrawer (row) {
-      this.$message.warning('当前项目暂未接入温度补偿功能')
+      this.temperatureTitle = this.key('temperature')
+      this.temperatureFlowProcessId = row.id || ''
+      this.temperatureVisible = true
     },
     openCalculationScriptDrawer (row) {
-      this.$message.warning('当前项目暂未接入计算脚本功能')
+      this.calculationTitle = this.key('calculation_script')
+      this.calculationFlowProcessId = row.id || ''
+      this.calculationVisible = true
     },
     async handleSettingSubmit (data) {
       await setSetting({